Highlite International Showtec LED Powerbar 24 제품 설명서 - 페이지 8
{카테고리_이름} Highlite International Showtec LED Powerbar 24에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Highlite International Showtec LED Powerbar 24 13 페이지.
페이지 인쇄DMX Operation
Press the Up/Down button to change the DMX address setting rnenu:
The DMX Channel functions when using the entire device as one:
Channel 1:
Red (0-255)
Channel 2:
Green (0-255)
Channel 3:
Blue (0-255)
The LED Powerbar's built-in controller will automatically detect the presence of a DMX signal.
In order to receive a DMX signal, the built-in controller must be attached to a DMX controller by a 3-pin DMX
cable and the DMX controller must be turned on.
To mix RGB color use channels 1, 2, 3.
Note: When there is no DMX signal, the LED Powerbar will switch to Stand-alone Mode after a few
seconds.
DMX Addressing
Unit address
1
2
3
4
5
6
7
8
9
.
.
Etc.
DMX address
1
4
7
10
13
16
19
22
25
.
.
.
6