HighPoint Rocket 1508 Panduan Instalasi Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Perangkat Keras Komputer HighPoint Rocket 1508. HighPoint Rocket 1508 11 halaman. 8x m.2 port to pcie 4.0 x16 nvme hba
Juga untuk HighPoint Rocket 1508: Panduan Instalasi Cepat (6 halaman)

Halaman Cetak

R1508 Hardware Installation

Step 1. On the rear of the R1508, remove the six screws that secure the

unit's heat sink to the PCB.

Step 2. After removing the screws, carefully remove the fan's power

cable from the right-side of the heatsink as shown below, then

carefully flip the heatsink to the left (like turning a page from a

book).

Note:

Take care when moving the heatsink to prevent damaging

the left fan's power cable.