HighPoint Rocket 1508 Snelle installatiehandleiding - Pagina 4

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} HighPoint Rocket 1508. HighPoint Rocket 1508 11 pagina's. 8x m.2 port to pcie 4.0 x16 nvme hba
Ook voor HighPoint Rocket 1508: Snelle installatiehandleiding (6 pagina's)

Pagina afdrukken

R1508 Hardware Installation

Step 1. On the rear of the R1508, remove the six screws that secure the

unit's heat sink to the PCB.

Step 2. After removing the screws, carefully remove the fan's power

cable from the right-side of the heatsink as shown below, then

carefully flip the heatsink to the left (like turning a page from a

book).

Note:

Take care when moving the heatsink to prevent damaging

the left fan's power cable.