Emerson Bettis RTS Panduan Pemasangan, Pengoperasian, dan Pemeliharaan - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Pemasangan, Pengoperasian, dan Pemeliharaan untuk Peralatan Industri Emerson Bettis RTS. Emerson Bettis RTS 18 halaman. Extension board for modbus rtu
Juga untuk Emerson Bettis RTS: Panduan Servis (18 halaman), Panduan Pemasangan, Pengoperasian, dan Pemeliharaan (16 halaman), Panduan Pemasangan, Pengoperasian, dan Pemeliharaan (18 halaman), Panduan Pemasangan, Pengoperasian, dan Pemeliharaan (16 halaman)
Halaman Cetak
Installation, Operation and Maintenance Manual
VCIOM-15590-EN Rev. 0
4.2.4
Actual Speed
Module numbe: 15
ID-byte: 50
Data format: 16-bit, only the lower 8 bits are used (bit 7: direction OPEN; bit 6 - 0: 0 - 100
corresponding to 0 - 100%)
The other bits are reserved for future use and have to be hidden!
4.2.5
External Actual Value
Only with PID controller option!
Module number: 16
ID-byte: 50
Data format: 16-bit, the lower 10 bits (0 - 1,023) are used.
The other bits are reserved for future use and have to be hidden!
4.2.6
Status 2
Module number: 17
ID-byte: 50
Datenformat: 16 bit (bit field)
Structure:
Table 9.
Bit no.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Parameter P15.6 can be used to set alternative output functions for Status 2.
Input and Output Data
Hex
(1 word AA / consistency 1 word)
Hex
Hex
(1 word AA / consistency 1 word)
Hex
Hex
(1 word AA / consistency 1 word)
Hex
Description
Function
Bit = 0
Dig. Output 1
-
Dig. Output 2
-
Dig. Output 3
-
Dig. Output 4
-
Dig. Output 5
-
Dig. Output 6
-
Dig. Output 7
-
Dig. Output 8
-
Dig. Input 1
-
Dig. Input 2
-
Dig. Input 3
-
Dig. Input 4
-
Dig. Input 5
-
PHASE SEQUENCE
-
FC ERROR
-
FAIL-SAFE ERROR
-
Section 4: Input and Output Data
Bit = 1
Corresponding binary output is set.
Corresponding binary input is set.
Phase sequence error: error in supply voltage (incorrect
phase sequence, phase loss, total loss, asymmetry)
FC ERROR: error in the power supply unit and/or the
frequency converter (if there is one)
Fail-safe unit not ready (if there is one)
November 2021
11