AFL MFT Panduan Referensi Cepat - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Peralatan Uji AFL MFT. AFL MFT 17 halaman. Multi-fiber identification system
Halaman Cetak
Identifying a Specific Fiber with MFT and MFI
During network installation, verification, and routing it is often necessary to verify
and reinstall mislabled fibers or repair broken links.
When used in conjunction with an MFT, an MFI will detect if the fiber under test
carry a signal emitted from MFT. An MFI will also display the ID of fiber under test.
Connect the MFT to the fiber network to be tested.
•
Turn On the MFT.
•
Turn On the MFI and insert the fiber to be tested in the fiber groove.
•
Pull down and hold the clamping trigger to depress the fiber under test into the
•
optical assembly.
When the MFT signal is detected, fiber ID will display on the MFI. Verify if the
•
fiber ID on display is matching fiber under test.
MTP Port
Multi-Fiber Tracer
MFT
MFT
Fiber/Ribbon Under Test
MTP Fan-out
9
888
No
ID
MFI
MFI