AFL MFT 빠른 참조 매뉴얼 - 페이지 9
{카테고리_이름} AFL MFT에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AFL MFT 17 페이지. Multi-fiber identification system
페이지 인쇄
Identifying a Specific Fiber with MFT and MFI
During network installation, verification, and routing it is often necessary to verify
and reinstall mislabled fibers or repair broken links.
When used in conjunction with an MFT, an MFI will detect if the fiber under test
carry a signal emitted from MFT. An MFI will also display the ID of fiber under test.
Connect the MFT to the fiber network to be tested.
•
Turn On the MFT.
•
Turn On the MFI and insert the fiber to be tested in the fiber groove.
•
Pull down and hold the clamping trigger to depress the fiber under test into the
•
optical assembly.
When the MFT signal is detected, fiber ID will display on the MFI. Verify if the
•
fiber ID on display is matching fiber under test.
MTP Port
Multi-Fiber Tracer
MFT
MFT
Fiber/Ribbon Under Test
MTP Fan-out
9
888
No
ID
MFI
MFI