Galvanox PowerRail Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pengisi Daya Baterai Galvanox PowerRail. Galvanox PowerRail 2 halaman.

PERFECTLY

PLACED

POWER

ALWAYS THERE, ALWAYS RIGHT!

THE POWERRAIL BY

Setup Preparation

1. Choose a smooth even surface as mounting location for your

PowerRail.

2. Place PowerRail in selected location to ensure proper fit.

3. Determine best mounting option using included adhesive or

screws.

Adhesive Installation

1. Ensure mounting surface is clean, dry and oil free

2. Remove backing from one side of adhesive strip

3. Affix adhesive strip to back of PowerRail

4. Remove adhesive strip backing from back of PowerRail

5. Place PowerRail in desired location and press into place

6. Insert included screw covers over screw openings

To remove: Use included wedge tool to separate adhesive from

mounting surface. Do not apply force to PowerRail as this may

cause damage.

Screw Installation

1. Place PowerRail in desired location

2. Mark each screw location using a thin tipped pencil or pen

3. Drill pilot holes using 1/16" drill bit and remove any debris

4. Place PowerRail in mounting location aligning with predrilled

holes

5. Using Phillips screwdriver to set screws in place ensuring

not to overtighten

6. Insert included screw covers over screw openings

Powering Up

Connect included power adapter to power source and PowerRail;

the Green-Glow Power Indicator will illuminate.

Ensure power cord is fully inserted into PowerRail for optimal

performance.

The PowerRail PR400 features a dedicated Speed Port which

delivers constant highspeed QC power; The Blue-Glow Indicator

will illuminate when in use.