Coralife Bio Cube Petunjuk Manual - Halaman 10
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Aksesori Coralife Bio Cube. Coralife Bio Cube 13 halaman. Size 16
Juga untuk Coralife Bio Cube: Petunjuk Manual (12 halaman)
WARNING!
Make sure LEDs are turned off and unplug power
cords from power source or outlet before performing
any maintenance.
FIGURE 12
Minimum
Water
Level
Daily Maintenance
1. Visually observe the BioCube
filtration to make sure that the system is
functioning properly.
2. Check water level. Make sure to replace
evaporated water with freshwater to replenish
water supply (Figure 12).
Note: Use only freshwater to replace evaporated
water for both freshwater and saltwater setup.
Caution: Do not let water get below the
minimum water level.
Weekly Maintenance
1. Keep BioCube
surfaces clean from dust and
®
debris. Wipe exposed surfaces with a clean and
dampened soft terry cloth.
2. Open canopy and wipe down light lens cover
with a clean and dampened soft terry cloth.
3. Inspect filtration system for clogging and
excessive accumulation of debris. Clean and
remove debris from surface, bottom intake and
overflow tray. Rinse parts if needed.
Note: If using Bio-Balls or other biological media
in chamber 2, it is important to avoid cleaning
the bio-media to avoid removing the beneficial
bacteria needed to break down ammonia and
nitrites.
Monthly Maintenance
1. Remove used filter cartridge and discard
(Figure 13). Replace with new cartridge.
Note: Make sure to rinse new filter cartridge
with cool freshwater before installing inside
BioCube
.
®
2. Remove sponge filter from wet/dry section. Rinse
and clean sponge with cool freshwater to remove
accumulated organic buildup (Figure 13).
MAINTENANCE
lighting and
®
10
FIGURE 13
Filter Cartridge
Sponge Filter
Front
Back
Micron
Activated
Filter Pad
Carbon
(Mechanical
(Chemical
Filtration)
Filtration)
3. Disconnect water pump assembly from output
elbow attachment and detach pump from flexible
tubing (Figure 14).
FIGURE 14
Flexible Tubing
Water Pump