- ページ 10

アクセサリー Coralife Bio CubeのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Coralife Bio Cube 13 ページ。 Size 16
Coralife Bio Cube にも：取扱説明書 (12 ページ)

ページを印刷する

WARNING!

Make sure LEDs are turned off and unplug power

cords from power source or outlet before performing

any maintenance.

FIGURE 12

Minimum

Water

Level

Daily Maintenance

1. Visually observe the BioCube

filtration to make sure that the system is

functioning properly.

2. Check water level. Make sure to replace

evaporated water with freshwater to replenish

water supply (Figure 12).

Note: Use only freshwater to replace evaporated

water for both freshwater and saltwater setup.

Caution: Do not let water get below the

minimum water level.

Weekly Maintenance

1. Keep BioCube

surfaces clean from dust and

debris. Wipe exposed surfaces with a clean and

dampened soft terry cloth.

2. Open canopy and wipe down light lens cover

with a clean and dampened soft terry cloth.

3. Inspect filtration system for clogging and

excessive accumulation of debris. Clean and

remove debris from surface, bottom intake and

overflow tray. Rinse parts if needed.

Note: If using Bio-Balls or other biological media

in chamber 2, it is important to avoid cleaning

the bio-media to avoid removing the beneficial

bacteria needed to break down ammonia and

nitrites.

Monthly Maintenance

1. Remove used filter cartridge and discard

(Figure 13). Replace with new cartridge.

Note: Make sure to rinse new filter cartridge

with cool freshwater before installing inside

BioCube

2. Remove sponge filter from wet/dry section. Rinse

and clean sponge with cool freshwater to remove

accumulated organic buildup (Figure 13).

MAINTENANCE

lighting and

FIGURE 13

Filter Cartridge

Sponge Filter

Front

Back

Micron

Activated

Filter Pad

Carbon

(Mechanical

(Chemical

Filtration)

3. Disconnect water pump assembly from output

elbow attachment and detach pump from flexible

tubing (Figure 14).

FIGURE 14

Flexible Tubing

Water Pump