hikam Q7 Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Kamera IP hikam Q7. hikam Q7 6 halaman. Smart home wireless ip-camera
Juga untuk hikam Q7: Panduan Cepat (8 halaman)

hikam Q7 Manual
Smart Home Wireless IP-Kamera Q7
Manual for initial Launch
English
Preparation
Step 1: Please check /consider the following points
- Router supports a 2.4 GHz frequency band.
- Internet accessible via WLAN.
- Smartphone connected to the WLAN you would like to connect the camera with.
- Smartphone, camera and router are within a 3 meter radius during installation (after installing, you can
move the camera to your preferred location).
- You know the WLAN password.
Step 2: Start camera
Please connect the camera to a power source. It will start beeping: Di - Di - Di ...
If camera is not beeping, try resetting it:
- Turn camera on and wait for 30 seconds (the LEDs light up shortly, then you will hear a slight "Click" from the
camera and the LEDs will turn off again; then wait for some more seconds)
- Press "reset" button on bottom of the camera for 3 seconds with a paper clip, until you hear a "di" and then a
"cash" signal.
- Wait for another 30 seconds. The camera is now reset.
Step 3: HiKam-App
- Search App Store (iPhone) or Google Play (Android) for „HiKam Camera". Download and install App free
of charge.
- Register with the app by clicking „New Account Registration"
(see pictures 1 and 2)
Option 1: Launch using „AirLink"
- Configure camera using AirLink. The app will guide you through the configurations step by step. It will
only take 1 minute
(see pictures 3 and 4).
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
Picture 6
- Once the camera receives all configurations from your smartphone, you will hear a sound („Dong...").
The camera will connect to the router. Once connected, a permanent yellow LED light will come on.
- You are asked to name the camera and to enter the initial camera password which is 123.
(see picture 5)
- You will then be asked to enter a new password, consisting of 6-9 digits. Please do NOT start with "0"
(see picture 6)
- You can now follow the live video stream on your smartphone (yellow LED light will flash during live
video mode)