- ページ 3

IPカメラ hikam Q7のPDF マニュアルをオンラインで閲覧またはダウンロードできます。hikam Q7 6 ページ。 Smart home wireless ip-camera
hikam Q7 にも：クイックマニュアル (8 ページ)

Smart Home Wireless IP-Kamera Q7

Manual for initial Launch

English

Preparation

Step 1: Please check /consider the following points

- Router supports a 2.4 GHz frequency band.

- Internet accessible via WLAN.

- Smartphone connected to the WLAN you would like to connect the camera with.

- Smartphone, camera and router are within a 3 meter radius during installation (after installing, you can

move the camera to your preferred location).

- You know the WLAN password.

Step 2: Start camera

Please connect the camera to a power source. It will start beeping: Di - Di - Di ...

If camera is not beeping, try resetting it:

- Turn camera on and wait for 30 seconds (the LEDs light up shortly, then you will hear a slight "Click" from the

camera and the LEDs will turn off again; then wait for some more seconds)

- Press "reset" button on bottom of the camera for 3 seconds with a paper clip, until you hear a "di" and then a

"cash" signal.

- Wait for another 30 seconds. The camera is now reset.

Step 3: HiKam-App

- Search App Store (iPhone) or Google Play (Android) for „HiKam Camera". Download and install App free

of charge.

- Register with the app by clicking „New Account Registration"

(see pictures 1 and 2)

Option 1: Launch using „AirLink"

- Configure camera using AirLink. The app will guide you through the configurations step by step. It will

only take 1 minute

(see pictures 3 and 4).

Picture 1

Picture 2

Picture 3

Picture 4

Picture 5

Picture 6

- Once the camera receives all configurations from your smartphone, you will hear a sound („Dong...").

The camera will connect to the router. Once connected, a permanent yellow LED light will come on.

- You are asked to name the camera and to enter the initial camera password which is 123.

(see picture 5)

- You will then be asked to enter a new password, consisting of 6-9 digits. Please do NOT start with "0"

(see picture 6)

- You can now follow the live video stream on your smartphone (yellow LED light will flash during live

video mode)