GAM TwinSpin Panduan Petunjuk Pengoperasian - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Pencahayaan GAM TwinSpin. GAM TwinSpin 6 halaman. 1 motor
Halaman CetakMODE 3 OPERATION -- MODE SWITCH = 3 -- THREE CHANNEL OPERATION
•
Separate speed control and 16 bit position control
•
Set DMX address
•
The indexing gobo is controllable according to the following table:
FIRST CHANNEL %
100%
50 to 99%
50%
1 to 49%
0%
SECOND CHANNEL %
1 to 100%
0%
THIRD CHANNEL %
0 to 100%
Three channel selection operates the gobo indexing in 16 bit mode for smooth low speed tracking operation.
Ideal when using desk fade timing for live movement. Indexing takes the shortest route to the set position and
uses the speed set bythe first channel of gobo control. If the speed /direction channel is set to zero then indexing
will take place at 5 Rpm.
HEXADECIMAL
FUNCTION
1. Speed of indexing
2. Speed and direction of continuous spin
255 = FF
STOP
129 to 254
0.1 to 25 Rpm counterclockwise spin
128
STOP
1 to 127
25 Rpm to 0.1 clockwise spin
0
STOP
HEXADECIMAL
FUNCTION
Index position coarse
1 to 255
Index position coarse (8bit) 0 - 359 degrees
0
Continuous rotation controlled from first channel
FUNCTION
HEXADECIMAL
Index position fine
0 to 255
Index position fine (16 bit)
Page 3 of 6
12/06