GAM TwinSpin Panduan Petunjuk Pengoperasian - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Pencahayaan GAM TwinSpin. GAM TwinSpin 6 halaman. 1 motor
Halaman CetakMODE 4 OPERATION -- MODE SWITCH = 4 -- 4 CHANNEL OPERATION
•
Operates in 16 bit indexing mode and uses an extra channel to activate the index position while gobo is
rotating. Rotate and stop control is a one channel operation.
•
Set DMX address
•
Indexing gobo is controllable according to the following table:
FIRST CHANNEL %
51 to 100%
50%
0 to 49%
SECOND CHANNEL %
0 to 100%
THIRD CHANNEL %
0 to 100%
FOURTH CHANNEL %
60% to 100%
40% to 59%
0 to 39%
When indexing the speed and or direction is selected by channel 1
�
�
In index mode the speed-control-channel stop positions are not used
�
0% is full speed indexing
�
50% is 0.1 rpm indexing
�
100% (full) is full indexing
HEXADECIMAL
FUNCTION
1. Speed and direction of indexing
2. Speed and direction of continuous spin
129 to 255
0.1 to 25 Rpm counterclockwise spin
128
STOP
1 to 127
25 Rpm to 0.1 clockwise spin
FUNCTION
HEXADECIMAL
Index position coarse
0 to 255
Index position coarse (8 bit) 0 - 359 degrees
FUNCTION
HEXADECIMAL
Index position fine
0 to 255
Index position fine (16 bit)
FUNCTION
HEXADECIMAL
Stop at index position or continuous rotation control
153 to 255
Indexing by set direction
102 to 152
Continuous rotation
0 to 101
Indexing by shortest direction
Page 4 of 6
12/06