Dynojet Power commander FC Petunjuk Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Pengontrol Dynojet Power commander FC. Dynojet Power commander FC 4 halaman. 2018 kawasaki klx250s fuel controller
Juga untuk Dynojet Power commander FC: Panduan Petunjuk Instalasi (6 halaman)

Halaman Cetak
FIG.D
Unplug
FIG.E
FIG.F
IFC17900.01
www.powercommander.com
6
Locate and unplug the Fuel Injector at the top of the throttle body (Fig. D).
7
Plug the pair of 2-pin PCFC connectors in-line with the Fuel Injector and the
stock wiring harness (Fig. E).
8
Use the supplied Positap to attach the
unterminated GREY wire of the PCFC wiring
harness to the stock LIGHT BLUE wire of the
Throttle Position Sensor connector on the stock
wiring harness (Fig. F).
The bike's TPS is on the left side of the throttle
body.
9
Reinstall the fuel tank, bodywork, and the seat.
2018 Kawasaki KLX250S - 4