Dynojet Power commander FC 설치 지침 - 페이지 4

{카테고리_이름} Dynojet Power commander FC에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet Power commander FC 4 페이지. 2018 kawasaki klx250s fuel controller
Dynojet Power commander FC에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (6 페이지)

페이지 인쇄

FIG.D

Unplug

FIG.E

FIG.F

IFC17900.01

www.powercommander.com

Locate and unplug the Fuel Injector at the top of the throttle body (Fig. D).

Plug the pair of 2-pin PCFC connectors in-line with the Fuel Injector and the

stock wiring harness (Fig. E).

Use the supplied Positap to attach the

unterminated GREY wire of the PCFC wiring

harness to the stock LIGHT BLUE wire of the

Throttle Position Sensor connector on the stock

wiring harness (Fig. F).

The bike's TPS is on the left side of the throttle

body.

Reinstall the fuel tank, bodywork, and the seat.

2018 Kawasaki KLX250S - 4