AgSense AQUA-TRAC Lite Petunjuk Pengkabelan - Halaman 11
Jelajahi secara online atau unduh pdf Petunjuk Pengkabelan untuk Alat Ukur AgSense AQUA-TRAC Lite. AgSense AQUA-TRAC Lite 20 halaman. 2015-18 soil moisture monitoring
Halaman CetakWiring the Decagon 5TM, 5TE, or MPS-2
Sensors to the Aqua Trac Lite Unit
Wiring the Decagon 5TM, 5TE, or MPS-2 sensor:
1. Connect the Red wire from the Decagon Sensor to the terminal marked SDI as shown
above.
2. Connect the Bare wire from the Decagon Sensor to the terminal marked GND as shown
above.
3. Connect the White wire from the Decagon Sensor to the terminal marked PWR as shown
above.
Page 8