AgSense AQUA-TRAC Lite Kablolama Talimatları - Sayfa 11
Ölçüm Cihazları AgSense AQUA-TRAC Lite için çevrimiçi göz atın veya pdf Kablolama Talimatları indirin. AgSense AQUA-TRAC Lite 20 sayfaları. 2015-18 soil moisture monitoring
Sayfayı YazdırWiring the Decagon 5TM, 5TE, or MPS-2
Sensors to the Aqua Trac Lite Unit
Wiring the Decagon 5TM, 5TE, or MPS-2 sensor:
1. Connect the Red wire from the Decagon Sensor to the terminal marked SDI as shown
above.
2. Connect the Bare wire from the Decagon Sensor to the terminal marked GND as shown
above.
3. Connect the White wire from the Decagon Sensor to the terminal marked PWR as shown
above.
Page 8