Deagostini MODEL SPACE Honda CB750 FOUR Panduan Perakitan - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Mainan Deagostini MODEL SPACE Honda CB750 FOUR. Deagostini MODEL SPACE Honda CB750 FOUR 16 halaman. Pack 12
Juga untuk Deagostini MODEL SPACE Honda CB750 FOUR: Panduan Perakitan (16 halaman), Panduan Perakitan (20 halaman), Panduan Perakitan (16 halaman), Panduan Perakitan (16 halaman), Panduan Perakitan (16 halaman), Panduan Perakitan (16 halaman), Panduan Perakitan (16 halaman)

Stage 57

The rear fender

and battery box

Tools

Prepare

Phillips screwdriver

Multi-purpose adhesive

Pliers

Screw (type E) (Stage 32)

Tweezers

Screw (type G) (Stage 34)

Cross wrench

Wire holder × 3 (Stage 34)

Screws (type E) × 2 (Stage 50)

Your parts

Rear frame joint

Exhaust joints × 4

Screw (type R)

Screw (type W)

Joint E

Joint B

4 × 9mm screws with washers × 4

Base frame 2

Screw (type Q) (Stage 50)

Battery box (Stage 53)

Main frame assembly (Stage 55)

Rear fender (Stage 56)

Honda CB750 FOUR: Assembly Guide

Prepare the main frame assembly from

Stage 55 and undo the nut at the end of

the pivot shaft.

Remove the centre stand, the chain

cover, the pivot shaft and the battery

box cover, then remove the drive chain

from the wheel and disconnect the rear

brake rod. Now remove the swingarm

and rear wheel from the frame.

Remove the left frame half from

the assembly.

Pass the battery box cable through the

hole (circled) in the right frame half.

275