HIKOKI WH 18DD Manual Petunjuk Penanganan - Halaman 7

Jelajahi secara online atau unduh pdf Manual Petunjuk Penanganan untuk Pengemudi Dampak HIKOKI WH 18DD. HIKOKI WH 18DD 11 halaman.

Halaman Cetak
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
WH18DD: Cordless Impact Driver
To reduce the risk of injury, user must read
instruction manual.
Direct current
V
Rated voltage
n
No-load speed
0
/min
Oscillation per minute
Bpm
Impact rate
S
Small screw
Ordinary bolt
H
High tension bolt
MT
Tightening torque (Maximum)
Hex. drive size
Weight
kg
Switching ON
Switching OFF
Disconnect the battery
Clockwise rotation
Counterclockwise rotation
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%.
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
Warning

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the
accessories listed on page 54.
Standard accessories are subject to change without notice.
APPLICATIONS
Driving and removing of machine screws, wood screws,
tapping screws, etc.

SPECIFICATIONS

The speci cations of this machine are listed in the Table on
page 54.
NOTE
Due to HiKOKI's continuing program of research and
development, the speci cations herein are subject to
change without prior notice.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1- second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 2 (on page 2).
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the pilot lamp
will blink in red. (At 1-second intervals) (See Table 1)
● Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or the
rechargeable battery.
7
English