Jaen Siracusa 16E+ Manual - Halaman 8

Jelajahi secara online atau unduh pdf Manual untuk Alat Musik Jaen Siracusa 16E+. Jaen Siracusa 16E+ 20 halaman.

Adjusting the Bridge Height

You should do this...

Whenever there are buzzes in wide areas of the fretboard. The height

may be lowered if the action is too high and there are no buzzes.

Necessary tools: Small Hex key, supplied with the guitar.

Method:

Depending on the problem affecting

more the bass strings than the treble

strings, you will have to turn the

corresponding adjustment screw to

each side of the bridge saddle.

Clockwise

counterclockwise to raise it. The

adjustment will be finished when the

strings are high enough so that, in

your playing style,

buzzes.

Notes:

I usually set the action very low before delivering my instruments.



You can always raise it if you like it better.

If you use thin plain strings, it is possible to have buzzes because



they don't have enough tension for straightening out the small

irregularities in the steel caused by playing. Use new strings before

performing any adjustment.

After this adjustment, you should also check the truss rod tension



and compensation adjustments, as explained later.

lower

it,

and

there are no