Jaen Siracusa 16E+ 매뉴얼 - 페이지 8

{카테고리_이름} Jaen Siracusa 16E+에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jaen Siracusa 16E+ 20 페이지.

Adjusting the Bridge Height

You should do this...

Whenever there are buzzes in wide areas of the fretboard. The height

may be lowered if the action is too high and there are no buzzes.

Necessary tools: Small Hex key, supplied with the guitar.

Method:

Depending on the problem affecting

more the bass strings than the treble

strings, you will have to turn the

corresponding adjustment screw to

each side of the bridge saddle.

Clockwise

counterclockwise to raise it. The

adjustment will be finished when the

strings are high enough so that, in

your playing style,

buzzes.

Notes:

I usually set the action very low before delivering my instruments.



You can always raise it if you like it better.

If you use thin plain strings, it is possible to have buzzes because



they don't have enough tension for straightening out the small

irregularities in the steel caused by playing. Use new strings before

performing any adjustment.

After this adjustment, you should also check the truss rod tension



and compensation adjustments, as explained later.

lower

it,

and

there are no