HIKVISION ColorVu DS-2CE10KF3T-E Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION ColorVu DS-2CE10KF3T-E. HIKVISION ColorVu DS-2CE10KF3T-E 19 halaman. Bullet & turret camera
Halaman Cetak
1). Rotate the enclosure to adjust the pan position
[0° to 360°].
2). Move the main body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the main body to adjust the rotation
position [0° to 360°].
2.2.2 Ceiling Mounting with Junction Box/Inclined
Ceiling Mount
Before you start:
You need to purchase a junction box or inclined
ceiling mount in advance.
Ceiling mounting with junction box and inclined
ceiling mount are similar. Following steps take
junction box as an example.
Steps:
1. Paste the drill template for junction box to the place
where you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
3. (Optional) Drill the cable hole, when the cables are
routed through the wall.
4. Take apart the junction box.
5. Install the installation plate to the junction box
cover with three PM4 screws.
Figure 2-17 Install Installation Plate to Junction Box
6. Fit the camera onto the installation plate.
7. Turn the camera clockwise until it snaps into the
installation plate.
Figure 2-15 3-Axis Adjustment
Figure 2-16 Drill Template
Figure 2-18 Fit Camera
Cover
6