HIKVISION ColorVu DS-2CE10KF3T-E 사용자 설명서 - 페이지 11

{카테고리_이름} HIKVISION ColorVu DS-2CE10KF3T-E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION ColorVu DS-2CE10KF3T-E 19 페이지. Bullet & turret camera

1). Rotate the enclosure to adjust the pan position

[0° to 360°].

2). Move the main body up and down to adjust the

tilt position [0° to 75°].

3). Rotate the main body to adjust the rotation

position [0° to 360°].

2.2.2 Ceiling Mounting with Junction Box/Inclined

Ceiling Mount

Before you start:

You need to purchase a junction box or inclined



ceiling mount in advance.

Ceiling mounting with junction box and inclined



ceiling mount are similar. Following steps take

junction box as an example.

Steps:

1. Paste the drill template for junction box to the place

where you want to install the camera.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

3. (Optional) Drill the cable hole, when the cables are

routed through the wall.

4. Take apart the junction box.

5. Install the installation plate to the junction box

cover with three PM4 screws.

Figure 2-17 Install Installation Plate to Junction Box

6. Fit the camera onto the installation plate.

7. Turn the camera clockwise until it snaps into the

installation plate.

Figure 2-15 3-Axis Adjustment

Figure 2-16 Drill Template

Figure 2-18 Fit Camera

Cover