HIKVISION D0T Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION D0T. HIKVISION D0T 11 halaman. Audio turret camera
Juga untuk HIKVISION D0T: Panduan Pengguna (17 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (15 halaman), Panduan Pengguna (11 halaman), Panduan Pengguna (17 halaman)
Halaman Cetak
2 Installation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with your
required output to avoid damage.
Make sure the wall is strong enough to withstand three
times the weight of the camera, and the mount.
If the wall is cement, insert expansion screws before
installing the camera. If the wall is wooden, use self-
tapping screw to secure the camera.
If the product does not function properly, contact your
dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Ceiling Mounting
Steps:
1. Disassemble the camera.
1) Rotate the camera to align the notch to the round
mark.
2) Pry the mounting base to remove the enclosure by
using a tool, e.g., a coin.
2. Paste the drill template (supplied) to the place where
you want to install the camera.
3. Drill the screw holes, and the cable hole (optional) on
the ceiling according to the drill template.
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable
4. Attach the mounting base to the ceiling, and secure it
with supplied screws.
Notch
Figure 2-1 Disassemble the Camera
Figure 2-2 The Drill Template
.
Round Mark
Coin