HIKVISION D0T Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION D0T. HIKVISION D0T 11 halaman. Audio turret camera
Juga untuk HIKVISION D0T: Panduan Pengguna (17 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (15 halaman), Panduan Pengguna (11 halaman), Panduan Pengguna (17 halaman)

Figure 2-3 Attach the Mounting Base to Ceiling

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement wall/ceiling, expansion bolts are required



to install the camera. For wooden wall/ceiling, self-

tapping screws are required.

5. Route the cables through the cable hole, or the side

opening.

6. Put the main body back to the enclosure.

7. Align the camera with the mounting base, and secure

the camera on it.

Figure 2-4 Secure the Camera on the Mounting Base

8. Connect the corresponding cables.

9. Power on the camera to check whether the image on

the monitor is gotten from the optimum angle. If not,

adjust the camera according to the figure below to get

an optimum angle.

1). Hold the camera body and rotate the enclosure to

adjust the pan position [0° to 360°].

2). Move the camera body up and down to adjust the

tilt position [0° to 75°].

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

2.2 Wall Mounting

Before you start:

You need to purchase a wall mount in advance.

Steps:

1. Drill screw holes on the wall according to the holes of

the mount.

2. Install the mount to the wall by aligning the four screw

holes of the mount with expansion screws on the wall.

Figure 2-5 3-axis Adjustment