HIKVISION D0T Manuale d'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale d'uso per Telecamera di sicurezza HIKVISION D0T. HIKVISION D0T 11. Audio turret camera
Anche per HIKVISION D0T: Manuale d'uso (17 pagine), Manuale d'uso (17 pagine), Manuale d'uso (15 pagine), Manuale d'uso (11 pagine), Manuale d'uso (17 pagine)
Stampa la pagina
Figure 2-3 Attach the Mounting Base to Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are required
to install the camera. For wooden wall/ceiling, self-
tapping screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Put the main body back to the enclosure.
7. Align the camera with the mounting base, and secure
the camera on it.
Figure 2-4 Secure the Camera on the Mounting Base
8. Connect the corresponding cables.
9. Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below to get
an optimum angle.
1). Hold the camera body and rotate the enclosure to
adjust the pan position [0° to 360°].
2). Move the camera body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
2.2 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill screw holes on the wall according to the holes of
the mount.
2. Install the mount to the wall by aligning the four screw
holes of the mount with expansion screws on the wall.
Figure 2-5 3-axis Adjustment