HIKVISION D0T 사용자 설명서 - 페이지 7

{카테고리_이름} HIKVISION D0T에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION D0T 11 페이지. Audio turret camera
HIKVISION D0T에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (11 페이지), 사용자 설명서 (17 페이지)

페이지 인쇄
HIKVISION D0T 사용자 설명서
Figure 2-3 Attach the Mounting Base to Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are required
to install the camera. For wooden wall/ceiling, self-
tapping screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Put the main body back to the enclosure.
7. Align the camera with the mounting base, and secure
the camera on it.
Figure 2-4 Secure the Camera on the Mounting Base
8. Connect the corresponding cables.
9. Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below to get
an optimum angle.
1). Hold the camera body and rotate the enclosure to
adjust the pan position [0° to 360°].
2). Move the camera body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
2.2 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill screw holes on the wall according to the holes of
the mount.
2. Install the mount to the wall by aligning the four screw
holes of the mount with expansion screws on the wall.
Figure 2-5 3-axis Adjustment