HIKVISION D0T User Manual - Page 7

Browse online or download pdf User Manual for Security Camera HIKVISION D0T. HIKVISION D0T 11 pages. Audio turret camera
Also for HIKVISION D0T: User Manual (17 pages), User Manual (17 pages), User Manual (15 pages), User Manual (11 pages), User Manual (17 pages)

Print Page
HIKVISION D0T User Manual
Figure 2-3 Attach the Mounting Base to Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are required
to install the camera. For wooden wall/ceiling, self-
tapping screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Put the main body back to the enclosure.
7. Align the camera with the mounting base, and secure
the camera on it.
Figure 2-4 Secure the Camera on the Mounting Base
8. Connect the corresponding cables.
9. Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below to get
an optimum angle.
1). Hold the camera body and rotate the enclosure to
adjust the pan position [0° to 360°].
2). Move the camera body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
2.2 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill screw holes on the wall according to the holes of
the mount.
2. Install the mount to the wall by aligning the four screw
holes of the mount with expansion screws on the wall.
Figure 2-5 3-axis Adjustment