HIKVISION D8T Series Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION D8T Series. HIKVISION D8T Series 17 halaman. Turbo hd turret camera
Juga untuk HIKVISION D8T Series: Panduan Pengguna (17 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (12 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (15 halaman), Panduan Pengguna (12 halaman), Panduan Pengguna (17 halaman)

For cement wall/ceiling, expansion bolts are



required to fix the camera. For wooden

wall/ceiling, self-tapping screws are required.

5. Route the cables through the cable hole, or the side

opening.

6. Secure the camera on the adapter plate.

7. Connect the corresponding cables, such as power

cord, and video cable.

8. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

9. Adjust the pan position [0° to 340°], the tilt position

[0° to 75°], and the rotation position [0° to 355°].

10. Install the bubble back to the camera.

Figure 2-13 Install the Bubble Back

11. Finish the installation.

2.3 Ceiling Mounting of Type III Camera

Before you start:

Both wall mounting and ceiling mounting are suitable

for the dome camera. Ceiling mounting will be taken as

an example in this section. And you can take steps of

ceiling mounting as a reference for wall mounting.

Figure 2-11 Secure the Camera

Pan Position

0° to 340°

Tilt Position

0° to 75°

Rotation Position

0° to 355°

Figure 2-12 3-axis Adjustment

Figure 2-14 Finish Installation