- ページ 8
防犯カメラ HIKVISION D8T SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION D8T Series 17 ページ。 Turbo hd turret camera
HIKVISION D8T Series にも： ユーザーマニュアル (17 ページ), ユーザーマニュアル (17 ページ), ユーザーマニュアル (12 ページ), ユーザーマニュアル (16 ページ), ユーザーマニュアル (15 ページ), ユーザーマニュアル (12 ページ), ユーザーマニュアル (17 ページ)
ページを印刷する
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Secure the camera on the adapter plate.
7. Connect the corresponding cables, such as power
cord, and video cable.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
9. Adjust the pan position [0° to 340°], the tilt position
[0° to 75°], and the rotation position [0° to 355°].
10. Install the bubble back to the camera.
Figure 2-13 Install the Bubble Back
11. Finish the installation.
2.3 Ceiling Mounting of Type III Camera
Before you start:
Both wall mounting and ceiling mounting are suitable
for the dome camera. Ceiling mounting will be taken as
an example in this section. And you can take steps of
ceiling mounting as a reference for wall mounting.
Figure 2-11 Secure the Camera
Pan Position
0° to 340°
Tilt Position
0° to 75°
Rotation Position
0° to 355°
Figure 2-12 3-axis Adjustment
Figure 2-14 Finish Installation