Bristan EXD TBAS C Panduan Petunjuk Instalasi - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Produk Pipa Bristan EXD TBAS C. Bristan EXD TBAS C 16 halaman.
Halaman Cetak
Maintenance
General Cleaning
Your fitting has a high quality finish and
should be treated with care to preserve
the visible surfaces. All surfaces will
wear if not cleaned correctly, the only safe
way to clean your mixer is to wipe with a
soft damp cloth. Stains can be removed
using washing up liquid. All bath cleaning
powders and liquids will damage the
surface of your fitting, even the
non-scratch cleaners.
Note: Never use abrasive detergents or
disinfectants or those containing alcohol,
hydrochloric acid or phosphoric acid.
Cleaning the Cartridge
Before carrying out any maintenance,
turn off both water supplies or close any
isolating valves.
Prise out the handle cap, loosen the grub
screw using a 2.5 mm hexagonal key and
remove the handle.
Unscrew the shroud and cartridge retaining
nut and pull the cartridge out from the body.
Clean the cartridge thoroughly under cold
water to remove any build up of limescale
or debris.
If necessary replace the cartridge using
parts supplied by Bristan only.
Replace the cartridge into the body and
tighten the retaining nut to secure in place.
Screw the shroud onto the retaining nut and
push the handle onto the cartridge. Tighten
the grub screw and push fit the cap.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
Grub Screw
Handle
Shroud
Retaining
Nut
Cartridge
Tap Body
Important: Tighten the retaining nut
with the correct size spanner and
apply appropriate force/torque.
Do not overtighten.
Cap
2.5 mm
hexagonal key
11