Bristan EXD TBAS C 설치 지침 매뉴얼 - 페이지 11

{카테고리_이름} Bristan EXD TBAS C에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan EXD TBAS C 16 페이지.

페이지 인쇄

Maintenance

General Cleaning

Your fitting has a high quality finish and

should be treated with care to preserve

the visible surfaces. All surfaces will

wear if not cleaned correctly, the only safe

way to clean your mixer is to wipe with a

soft damp cloth. Stains can be removed

using washing up liquid. All bath cleaning

powders and liquids will damage the

surface of your fitting, even the

non-scratch cleaners.

Note: Never use abrasive detergents or

disinfectants or those containing alcohol,

hydrochloric acid or phosphoric acid.

Cleaning the Cartridge

Before carrying out any maintenance,

turn off both water supplies or close any

isolating valves.

Prise out the handle cap, loosen the grub

screw using a 2.5 mm hexagonal key and

remove the handle.

Unscrew the shroud and cartridge retaining

nut and pull the cartridge out from the body.

Clean the cartridge thoroughly under cold

water to remove any build up of limescale

or debris.

If necessary replace the cartridge using

parts supplied by Bristan only.

Replace the cartridge into the body and

tighten the retaining nut to secure in place.

Screw the shroud onto the retaining nut and

push the handle onto the cartridge. Tighten

the grub screw and push fit the cap.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Grub Screw

Handle

Shroud

Retaining

Nut

Cartridge

Tap Body

Important: Tighten the retaining nut

with the correct size spanner and

apply appropriate force/torque.

Do not overtighten.

Cap

2.5 mm

hexagonal key