Gamma Oculus 40 Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Pencahayaan Gamma Oculus 40. Gamma Oculus 40 12 halaman. 12x40w rgbw led wash with pixel mapping
Halaman Cetak
Introduction and Setup
1.
Unpacking and In the Box
Thank you for choosing our Oculus 40. For your own safety, please read this manual before
installing or using the device. This manual covers the important information on installation and
applications. Please install and operate the fixture with following instructions. Meanwhile,
please keep this manual for future needs.
In the box you will find:
Oculus 40 Fixture -
Omega Clamps -
Power Cable -
DMX Signal Cable
Mounting and Operation
Clamp Mounting: The Oculus 40 moving head provides a unique mounting bracket
assembly that integrates the bottom of the base, and the safety cable rigging point in one
unit.
When mounting this fixture to truss be sure to secure an appropriately rated clamp to the
included omega bracket using a M10 screw fitted through the center hole of the "omega
bracket".
As an added safety measure be sure to attached at least one properly rated safety cable
to the fixture using on of the safety cable rigging point integrated in the base assembly.
Features
12*40w LED Wash light
12 Pixel-Mappable Zones
7°-70° Zoomable Beam Angle
Adjustable Strobe and Dimmer Effect
Safety Precautions
Do not expose this fixture to rain or moisture.
Do not spill water or other liquids into or on your unit.
Oculus 40 – GAMMA LED Vision
1
2
1
1
Page 3 of 12