Gamma Oculus 40 사용자 설명서 - 페이지 3

{카테고리_이름} Gamma Oculus 40에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Oculus 40 12 페이지. 12x40w rgbw led wash with pixel mapping

Introduction and Setup

Thank you for choosing our Oculus 40. For your own safety, please read this manual before

installing or using the device. This manual covers the important information on installation and

applications. Please install and operate the fixture with following instructions. Meanwhile,

please keep this manual for future needs.

In the box you will find:

Oculus 40 Fixture -

Omega Clamps -

Power Cable -

DMX Signal Cable

Clamp Mounting: The Oculus 40 moving head provides a unique mounting bracket

assembly that integrates the bottom of the base, and the safety cable rigging point in one

unit.

When mounting this fixture to truss be sure to secure an appropriately rated clamp to the

included omega bracket using a M10 screw fitted through the center hole of the "omega

bracket".

As an added safety measure be sure to attached at least one properly rated safety cable

to the fixture using on of the safety cable rigging point integrated in the base assembly.

 12*40w LED Wash light

 12 Pixel-Mappable Zones

 7°-70° Zoomable Beam Angle

 Adjustable Strobe and Dimmer Effect

Do not expose this fixture to rain or moisture.

Do not spill water or other liquids into or on your unit.

Oculus 40 – GAMMA LED Vision

Page 3 of 12