DECKED MG3 Panduan Petunjuk Instalasi - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Aksesori Mobil DECKED MG3. DECKED MG3 19 halaman. 5'2" or 6' 2” bed length for chevy colorado 2015; chevy colorado2016; chevy colorado2017; gmc canyon 2015; gmc canyon 2016; gmc canyon 2017

Halaman Cetak

FINAL STEPS: TORSION BRACE + BOTTLE

• Slide torsion brace under center vert and tailgate ammo cans.

NOTE: If you jumped the gun and tightened the J-hooks when installing, loosen them.

• Loosely install:

• Two bolts through the end holes in torsion brace into ammo cans; BAG S1.

• Two bolts through the bottom bottle opener holes and torsion brace into center vert; BAG S1.

• Two 1/2" length bolts through upper holes in bottle opener into center vert; BAG FINAL MID.

• Align bottle opener to edges of center vert and tighten four bottle opener bolts.

• Tighten end bolts into tailgate ammo cans.

• Finally.....Tighten the J-hooks! DO NOT OVER TIGHTEN, just make snug. Make sure the gap between the

sidewall of the bed and the deck on the driver side is equal to gap on the passenger side.

HELPFUL TIP: Bottle opener goes outside

of torsion brace.

OPENER

TORSION BRACE

BOTTLE OPENER

1/2" LENGTH BOLTS

BAG FINAL MID

MG3 & MG4 | V1 | Page 14