DECKED MG3 Panduan Petunjuk Instalasi - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Aksesori Mobil DECKED MG3. DECKED MG3 19 halaman. 5'2" or 6' 2” bed length for chevy colorado 2015; chevy colorado2016; chevy colorado2017; gmc canyon 2015; gmc canyon 2016; gmc canyon 2017

Halaman Cetak

• Center ruler in embossed area and screw three 1/2" length Phillips screws through the tailgate side holes directly

into deck panels; BAG FINAL MID.

NOTE: These are small gauge screws. Tighten to a light snuggle ONLY.

• For the three cabside ruler mounting holes, drill each with a 9/64" bit and a drill stop set to 1/2". There is a lateral

steel tube that runs on the underside of the deck at this location. (SEE UNDERSIDE VIEW OF DECK).

IMPORTANT: Only drill through TOP of steel tube; do not drill through bottom of tube, 'lest you want to pull a

Niagara Falls and funnel water into your drawers.

• Screw three 3/4" length Phillips screws into the cabside ruler holes you just drilled; BAG FINAL MID.

UNDERSIDE VIEW OF DECK

BAM BAM: THE RULER

DO:

Drill through the top of steel

tube ONLY.

DO NOT:

of steel tube

STEEL TUBE RUNS LATERALLY UNDER THESE 3 RULER

HOLES. THEY TAKE THE 3/4" SCREWS.

Drill through both sides

= YOU'RE FIRED!

9/64" DRILL BIT

MG3 & MG4 | V1 | Page 15

DRILL STOP

1/2"