DECKED MG3 Manual de instruções de instalação - Página 17

Procurar online ou descarregar pdf Manual de instruções de instalação para Acessórios para automóveis DECKED MG3. DECKED MG3 19 páginas. 5'2" or 6' 2” bed length for chevy colorado 2015; chevy colorado2016; chevy colorado2017; gmc canyon 2015; gmc canyon 2016; gmc canyon 2017

Imprimir página

• Center ruler in embossed area and screw three 1/2" length Phillips screws through the tailgate side holes directly

into deck panels; BAG FINAL MID.

NOTE: These are small gauge screws. Tighten to a light snuggle ONLY.

• For the three cabside ruler mounting holes, drill each with a 9/64" bit and a drill stop set to 1/2". There is a lateral

steel tube that runs on the underside of the deck at this location. (SEE UNDERSIDE VIEW OF DECK).

IMPORTANT: Only drill through TOP of steel tube; do not drill through bottom of tube, 'lest you want to pull a

Niagara Falls and funnel water into your drawers.

• Screw three 3/4" length Phillips screws into the cabside ruler holes you just drilled; BAG FINAL MID.

UNDERSIDE VIEW OF DECK

BAM BAM: THE RULER

DO:

Drill through the top of steel

tube ONLY.

DO NOT:

of steel tube

STEEL TUBE RUNS LATERALLY UNDER THESE 3 RULER

HOLES. THEY TAKE THE 3/4" SCREWS.

Drill through both sides

= YOU'RE FIRED!

9/64" DRILL BIT

MG3 & MG4 | V1 | Page 15

DRILL STOP

1/2"