Major tech MT25 Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Multimeter Major tech MT25. Major tech MT25 16 halaman. 600v ac/dc multimeter

5. Operation

The meter automatically turns off after 15 minutes of inactivity. To reset the

meter after it shuts off, turn rotary function switch to the off position and than

set the switch to the desired function. To disable Auto Power Off, turn the rotary

function switch to the off position. Press and hold the MODE button and set the

rotary function switch to the desired function except switch set to current.

Release the MODE button when the "

Auto Power Off is now disabled. Auto Power Off will be restored when the meter

is turned off and back on again.

Used to select AC or DC voltage, Hz or % Duty Cycle, Ohms, Diode Test,

Continuity or Capacitance, and °F and °C.

Momentarily press the MAX/MIN button to activate the MAX/MIN mode. The

"MAX" indicator will appear on the LCD display. The meter will display and

hold the maximum reading and will update when a higher "max" occurs.

Momentarily press the MAX/MIN button to view the lowest reading. The

"MIN" indicator meter will appear on the LCD display. The meter will display

and hold the minimum reading and will update when a lower "min" occurs.

Press and hold the MAX/MIN button to end MAX/MIN and return to normal

operation.

NOTE: The meter does not auto range when the MAX/MIN mode is active. The

display will read "OL" if the range is exceeded. MAX/MIN does not work on

Frequency, Duty Cycle, Diode Test, Continuity and Capacitance.

Press the

button to turn the ﬂashlight on and off.

To freeze the reading on the display, momentarily press the HOLD

"HOLD" will appear on the LCD display while the reading is being held.

Momentarily press the HOLD

The backlight illuminates the LCD display when the ambient light is too low to

view the displayed readings. To turn on, press and hold the HOLD

the backlight turns on. To turn off, press and hold the HOLD

the backlight turns off.

" symbol on the LCD display disappears.

button again to return to normal oper ation.

button.

button until

button again until