Major tech MT330 Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Uji Major tech MT330. Major tech MT330 12 halaman. Digital earth resistance tester

Halaman Cetak

11. 200kΩ RESISTANCE MEASUREMENTS

1. Set the function switch to the highest 200kΩ position.

2. Insert the black test lead banana plug into the negative COM jack

3. Insert the red test lead banana plug into the positive + jack.

4. Touch the test probe tips across the circuit or part under test. It is best

to disconnect one side of the part under test so the rest of the circuit

will not interfere with the resistance reading.

5. Read the resistance on the display

12. BATTERY REPLACEMENT

1. When the low battery symbol

batteries must be replaced.

2. Turn the meter off and remove the test leads

3. Unsnap the tilt stand from the rear of the meter

4. Remove the four Phillips head screws holding the battery cover

5. Remove the battery compartment cover

6. Replace the batteries observing polarity

Affix the rear cover and secure the screws.

8. Reattach the tilt stand

appears on the LCD, the six 1.5V 'AA'