Major tech MT330 Instruction Manual - Page 9

Browse online or download pdf Instruction Manual for Test Equipment Major tech MT330. Major tech MT330 12 pages. Digital earth resistance tester

Print Page

11. 200kΩ RESISTANCE MEASUREMENTS

1. Set the function switch to the highest 200kΩ position.

2. Insert the black test lead banana plug into the negative COM jack

3. Insert the red test lead banana plug into the positive + jack.

4. Touch the test probe tips across the circuit or part under test. It is best

to disconnect one side of the part under test so the rest of the circuit

will not interfere with the resistance reading.

5. Read the resistance on the display

1. When the low battery symbol

batteries must be replaced.

2. Turn the meter off and remove the test leads

3. Unsnap the tilt stand from the rear of the meter

4. Remove the four Phillips head screws holding the battery cover

5. Remove the battery compartment cover

6. Replace the batteries observing polarity

Affix the rear cover and secure the screws.

8. Reattach the tilt stand

appears on the LCD, the six 1.5V 'AA'