Major tech SL93 Petunjuk

Jelajahi secara online atau unduh pdf Petunjuk untuk Lampu Banjir Major tech SL93. Major tech SL93 3 halaman. Passive infrared light

SL93 and SL68

Passive Infrared Light

General:

The security light incorporates a PIR (Passive Infra Red)

sensing device which continuously scans a preset operating

zone and immediately switches the light on when it detects

movement in that area.

This means that whenever movement is detected within the

range of the sensor the light will switch on automatically to

illuminate pathways, steps, patios, porches, or whatever area

you have selected to light for reasons of safety, convenience or

security,

.Function:



Can identify day and night automatically, the ambient-light

can be adjusted, so it works at night automatically and

stops in the daytime.



Time-delay can be adjusted varying with the place.

How to change into MANUAL CONTROL MODE:

1. When power on, the PIR detector enters into the "WARN –UP" period for about 1 minute, then

automatically changes into "AUTO MODE".

2. During AUTO MODE, by switching off the ON/OFF main switch for about 4 seconds then switch on,

the PIR detector will automatically change into MANUAL MODE from AUTO MODE. In MANUAL

MODE, the lights will remain ON, not affected by duration time and Lux control level.

3. During MANUAL MODE or AUTO MODE, by switching off the ON/OFF main switch for over 30

seconds and then on again, the PIR detector will reset to "WARN-UP" periods.

Specifications:

Detection range:

Detection distance: 12m (<24℃)

Power source:

Time-delay: min

Max 7min±2min

Installation:

Instruction

180°

220 ~240V/AC

5sec

Rated load:

150W

500W

Working temperature:-10℃~+40℃

Working humidity: <93%RH

Ambient-light: <10Lux~2000Lux

Installation height: 2m~4.5m