Britannia Lynx S Manual Petunjuk Pemasangan

Jelajahi secara online atau unduh pdf Manual Petunjuk Pemasangan untuk Aksesori Sepeda Motor Britannia Lynx S. Britannia Lynx S 9 halaman. Fairings for ktm 690 2019 model on

Halaman Cetak

Fitting instructions for Lynx R & S Fairings

Thank you for purchasing the Lynx fairing

• 1 x Fairing

• 1x Screen

• 2x 35mm thumbscrews threaded into two plastic sliders and Nylock nuts.

• 2x 16mm M6 screws

• 2x 30mm M6 screws

• 2x 30mm M6 Flange bolts

• 2 x plastic washers

• 2 x M6 Flange Nuts

• 2 x 10mm aluminum Spacers

• 1 x Black Aluminum Support Plate

• 1 x Aluminum bottom bracket with threaded bolt, washer and Nylock nut

• 1 x ABS Dash.

• 1 x Wiring Harnes

Removing the OEM parts

• Secure the Motorcycle in a vertical position.

• Remove the seat

• Remove OEM fairing and unplug the headlight terminal

• Unplug the speedo terminal and remove your OEM instrument unit from it's

mounting. You will be re-using the 2 screws and rubber grommets to attach the

instrument to the Lynx Dashboard.

• Unplug and remove the triangular ABS warning light

• Remove the three indicator lights. The small bulbs just pull out of the bottom of the

white section on each indicator housing, but mark them to make sure you know which

light goes into the correct indicator lense.

– KTM 690 2019 model on