Britannia Lynx S 피팅 지침 매뉴얼
{카테고리_이름} Britannia Lynx S에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Britannia Lynx S 9 페이지. Fairings for ktm 690 2019 model on
Fitting instructions for Lynx R & S Fairings
Thank you for purchasing the Lynx fairing
• 1 x Fairing
• 1x Screen
• 2x 35mm thumbscrews threaded into two plastic sliders and Nylock nuts.
• 2x 16mm M6 screws
• 2x 30mm M6 screws
• 2x 30mm M6 Flange bolts
• 2 x plastic washers
• 2 x M6 Flange Nuts
• 2 x 10mm aluminum Spacers
• 1 x Black Aluminum Support Plate
• 1 x Aluminum bottom bracket with threaded bolt, washer and Nylock nut
• 1 x ABS Dash.
• 1 x Wiring Harnes
Removing the OEM parts
• Secure the Motorcycle in a vertical position.
• Remove the seat
• Remove OEM fairing and unplug the headlight terminal
• Unplug the speedo terminal and remove your OEM instrument unit from it's
mounting. You will be re-using the 2 screws and rubber grommets to attach the
instrument to the Lynx Dashboard.
• Unplug and remove the triangular ABS warning light
• Remove the three indicator lights. The small bulbs just pull out of the bottom of the
white section on each indicator housing, but mark them to make sure you know which
light goes into the correct indicator lense.
!
– KTM 690 2019 model on
!