Gamry LPI1010 Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Peralatan Uji Gamry LPI1010. Gamry LPI1010 5 halaman. Load/power supply interface high voltage eis test system

Halaman Cetak

Hardware Installation and Con�guration

Install your Interface 1010 potentiostat

Install your Interface 1010 potentiostat and calibrate the instrument. Please refer to the Interface 1010

Operator's Manual for detailed information. The latest version of the manual can be downloaded on the

Gamry Instruments website at https://www.gamry.com/support/documentation-downloads/.

Install the LPI1010 D-sub Module

Connect the LPI1010 D-sub Module to the

Cell Cable connector on the Interface 1010's

front panel and hand-tighten the jackscrews.

Install the LPI Power Cable

Connect the 15-pin HD D-sub connector of the LPI Power Cable to the mating User I/O connector on the

back of the Interface 1010 and hand-tighten the jackscrews.

Connect the male micro USB-B connector of the LPI Power Cable into the female micro USB-B connector

on the top side of the LPI1010 D-sub Module.