Gamry LPI1010 Snelstarthandleiding - Pagina 2
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Gamry LPI1010. Gamry LPI1010 5 pagina's. Load/power supply interface high voltage eis test system
Hardware Installation and Con�guration
Install your Interface 1010 potentiostat
Install your Interface 1010 potentiostat and calibrate the instrument. Please refer to the Interface 1010
Operator's Manual for detailed information. The latest version of the manual can be downloaded on the
Gamry Instruments website at https://www.gamry.com/support/documentation-downloads/.
Install the LPI1010 D-sub Module
Connect the LPI1010 D-sub Module to the
Cell Cable connector on the Interface 1010's
front panel and hand-tighten the jackscrews.
Install the LPI Power Cable
Connect the 15-pin HD D-sub connector of the LPI Power Cable to the mating User I/O connector on the
back of the Interface 1010 and hand-tighten the jackscrews.
Connect the male micro USB-B connector of the LPI Power Cable into the female micro USB-B connector
on the top side of the LPI1010 D-sub Module.