Gamut D 3I Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat Gamut D 3I. Gamut D 3I 16 halaman. Dual mono preamplifier

Placement

The D 3i will get hot during use. It is important that it has free space all around the player, especially

sides and the top.

Please make sure that there is at least 10 cm (4 inches) of free space all around the preampliﬁ er.

Your D 3i has been especially made for the country to which it has been shipped. Any attempt to

change the voltage or other types of modiﬁ cations should be considered unsafe and may cause dam-

age to both the ampliﬁ er and any connected equipment. Warranty is annulled by any form of modiﬁ -

cation performed by any person not authorised by GamuT.

Connect the D 3i to the mains supply with the supplied IEC mains cable.

For further improvements to the level of sound quality, various types of mains cable type may be

tested. Like the importance of any other cable in the system, the quality and reﬁ nement of the

mains cable has an inﬂ uence on the total balance of the sound. Please feel free to experiment with

the various brands available in your country. Please note that GamuT cannot accept responsibility

for damage incurred due to improper usage, connection, or manufacture of other cables than the

enclosed.

The mains switch is located underneath the ampliﬁ er's front right corner. When the ampliﬁ er is

switched on, the display will light up and you will hear two small clicks from inside the ampliﬁ er.

The GamuT D 3i features several types of in and outputs:

Four unbalanced inputs:

•

RIAA

•

Tuner

•

HTH

•

Tape

One balanced input

•

Please note that all connectors of the D 3i are gold plated . This is done to ensure long lasting and

stable connections. Do only use cable and connectors either gold or silver plated.

D 3i