Gamut D 3I Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat Gamut D 3I. Gamut D 3I 16 halaman. Dual mono preamplifier

D 3i

How to operate

Turning on the power is done using the main switch; at right hand lower corner just behind the front

panel.

By turning on the mains supply, the display will

illuminate. In the top row different input sourc-

es will appear. The row at the bottom will show

the functions of the three knobs just below the

display. A dot below each text will show which

inputs and function currently is selected and in

use.

Selecting the desired input source is achieved

by turning the big knob on the left side of the

D 3i and toggling through the inputs. A blue dot

below each name of the input indicates the

selected one. Turning the knob further after

reaching end of the row, will make the dot jump

to the other end of the input row.

The large knob on right side of the front panel

controls the volume. On the outside of the knob

a small dot in the indicates the level setting.

The scale goes from approx. 8 o'clock minimum

to approx 4 o'clock as maximum output level.

The output level can also be adjusted by the

remote control, please refer to the section

"Remote control".

Please note: We have selected an expensive ALPS dual logarithmic potentiometer for setting the

listening level. To reduce noise, we have chosen a 1kOhm version. Such a potentiometer cannot make

the sound disappear completely, even when you turn it down to the lowest setting. If complete si-

lence is required, enable the Mute function as described on the next page.