DECODE PRM4 Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Modem Radio DECODE PRM4. DECODE PRM4 20 halaman. 868mhz

Halaman Cetak

4.3 Command mode setup

AT
Command
EX
EXit
This command is used to exit the command
mode and enters the data transfer mode.
E0
Echo 0
This command turns off the echoing of the
characters sent in the command mode.
E1
Echo 1
This command turns on the echoing of the
characters sent in the command mode.
WR
WRite
This command saves the set parameters
into the permanent, EEPROM memory.
RE
Restore defaults
This command restores the default
configuration of the device.
DC
Display Configuration
This command displays the current
configuration.

4.4 Reduced power consumption mode setup

AT
Command
SM
Sleep Mode
By using this command the reduced power
consumption mode of operation can be
adjusted
configurations. If the devices with the
reduced
communicating only with a device in a
normal mode, the first group of devices is
set to ATSM2 whereas the device
operating in normal mode is set with
ATSM1. On the other hand, if all the
devices are operating in low power
consumption mode, they ought to be set
with ATSM3.
Radio modem PRM4 868MHz /User's manual V1.6 / 24.05.2011
Description
Description
to
fit
the
various
power
consumption
Parameter
none
none
none
none
none
none
Parameter
0 – 3
field
are
Default
value
-
-
E1
-
-
-
Default
value
0
16