DECODE PRM4 User Manual - Page 16

Browse online or download pdf User Manual for Radio Modems DECODE PRM4. DECODE PRM4 20 pages. 868mhz

Print Page

4.3 Command mode setup

Command

EXit

This command is used to exit the command

mode and enters the data transfer mode.

Echo 0

This command turns off the echoing of the

characters sent in the command mode.

Echo 1

This command turns on the echoing of the

characters sent in the command mode.

WRite

This command saves the set parameters

into the permanent, EEPROM memory.

Restore defaults

This command restores the default

configuration of the device.

Display Configuration

This command displays the current

configuration.

4.4 Reduced power consumption mode setup

Command

Sleep Mode

By using this command the reduced power

consumption mode of operation can be

adjusted

configurations. If the devices with the

reduced

communicating only with a device in a

normal mode, the first group of devices is

set to ATSM2 whereas the device

operating in normal mode is set with

ATSM1. On the other hand, if all the

devices are operating in low power

consumption mode, they ought to be set

with ATSM3.

Radio modem PRM4 868MHz /User's manual V1.6 / 24.05.2011

Description

fit

the

various

power

consumption

Parameter

none

Parameter

0 – 3

field

are

Default

value

Default

value