HIKVISION TURBO HD F1T Series Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION TURBO HD F1T Series. HIKVISION TURBO HD F1T Series 10 halaman. Turret camera
Juga untuk HIKVISION TURBO HD F1T Series: Panduan Pengguna (10 halaman)
Halaman Cetak
Figure 2-5 Fix the Camera to the Ceiling/Wall
6. Refer to step 5 of 2.1.1 to adjust the camera to get
an optimum angle.
2.2 Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting without Gang Box
Steps:
1. Attach the drill template (supplied) to the place
where you want to fix the camera, and then drill the
screw holes and the cable hole in the ceiling/wall
according to the drill template.
2. Route the cables through the cable hole.
3. Secure the camera to the ceiling with the supplied
Screws.
Figure 2-6 Fix the Camera to the Ceiling/Wall
4. Connect the corresponding cables.
5. Adjust the camera according to Figure 2-7 to get an
optimum angle.
1). Loosen the P screw to adjust the pan direction
[0°~360°]. Tighten the screw after completing
the adjustment.
2). Loosen the T screw to adjust the tilt direction
[0°~180°]. Tighten the screw after completing
the adjustment.
3). Loosen the R screw and rotate the camera
[0°~360°] to adjust the lens to the surveillance
angle. Tighten the screw after completing the
adjustment.
Rotation Position Range
[0°-360°]
Figure 2-7 3-axis Adjustment
Pan Position Range
[0°-360°]
P Screw
Tilt Position Range
[0°-180°]
T Screw
R Screw